• Before You Move

     

    Protect yourself by hiring a Licensed Home Inspector to inspect your potential new home. If you identify problems, have the landlord or seller correct them before you move in, or even consider moving elsewhere.

    • Have professionals check the heating and cooling system, including humidifiers and vents. Have duct lining and insulation checked for growth.
    • Check for exhaust fans in bathrooms and kitchens. If there are no vents, do the kitchen and bathrooms have at least one window in each room? Does the stovetop have a hood vented outside? Does the clothes dryer vent outside? Do all vents exhaust to the outside of the building, and not in attics or crawlspaces?
    • Look for obvious mold growth throughout the house, including attics, basements and crawlspaces, and around the foundation outside. See if there are many plants close to the house, particularly if they are damp and rotting. They are a potential source of biological pollutants. Downspouts from roof gutters should route water away from the building.
    • Look for stains on the walls, floor or carpet (including any carpet over concrete floors) as evidence of previous flooding or moisture problems. Is there moisture on windows and surfaces? Are there signs of leaks or seepage in the basement?
    • Look for rotted building materials, which may suggest moisture or water damage.
    • If you or anyone else in the family has a pet allergy, ask if any pets have lived in the home.
    • Examine the design of the building. Remember that in cold climates, overhanging areas, rooms over unheated garages, and closets on outside walls may be prone to problems with biological pollutants.
    • Look for signs of cockroaches. (Carefully read instructions for use and any cautionary labeling on cleaning products before beginning cleaning procedures.)
    • Do not mix any chemical products. Especially, never mix cleaners containing bleach with any product (such as ammonia) which does not have instructions for such mixing. When chemicals are combined, a dangerous gas can sometimes be formed.
    • Household chemicals may cause burning or irritation to skin and eyes.
    • Household chemicals may be harmful if swallowed or inhaled.
    • Avoid contact with skin, eyes, mucous membranes, and clothing.
    • Avoid breathing vapor. Open all windows and doors, and use an exhaust fan that sends the air outside.
    • Keep household chemicals out of reach of children.
    • Rinse treated surface areas well to remove all traces of chemicals.

    Correcting Water Damage

    What if damage is already done? Follow these guidelines for correcting water damage:

    • Throw out mattresses, wicker furniture, straw baskets and the like that have been water damaged or contain mold. These cannot be recovered.
    • Discard any water-damaged furnishings, such as carpets, drapes, stuffed toys, upholstered furniture, and ceiling tiles, unless they can be recovered by steam cleaning or hot-water washing and thorough drying.
    • Remove and replace wet insulation to prevent conditions where biological pollutants can grow.

    Reducing Exposure to Biological Contaminants

    General good housekeeping, and maintenance of heating and air-conditioning equipment, are very important. Adequate ventilation and good air distribution also help. The key to mold control is moisture control. If mold is a problem, clean up the mold and get rid of excess water and moisture. Maintaining the relative humidity between 30% to 60% will help control mold, dust mites and cockroaches. Employ integrated pest management to control insect and animal allergens. Cooling-tower treatment procedures exist to reduce levels of Legionella and other organisms.

    Install and use exhaust fans that are vented to the outdoors in kitchens and bathrooms, and vent clothes dryers outdoors. These actions can eliminate much of the moisture that builds up from everyday activities. There are exhaust fans on the market that produce little noise, an important consideration for some people. Another benefit to using kitchen and bathroom exhaust fans is that they can reduce levels of organic pollutants that vaporize from hot water used in showers and dishwashers. Ventilate the attic and crawlspaces to prevent moisture build-up. Keeping humidity levels in these areas below 50% can prevent water condensation on building materials.

    If using cool mist or ultrasonic humidifiers, clean appliances according to the manufacturer’s instructions and refill with fresh water daily. Because these humidifiers can become breeding grounds for biological contaminants, they have the potential for causing diseases such as hypersensitivity pneumonitis and humidifier fever. Evaporation trays in air conditioners, dehumidifiers, and refrigerators should also be cleaned frequently.

    Thoroughly clean and dry water-damaged carpets and building materials (within 24 hours, if possible), or consider removal and replacement. Water-damaged carpets and building materials can harbor mold and bacteria. It is very difficult to completely rid such materials of biological contaminants.

    Keep the house clean. House dust mites, pollens, animal dander, and other allergy-causing agents can be reduced, although not eliminated, through regular cleaning. People who are allergic to these pollutants should use allergen-proof mattress encasements, wash bedding in hot water (130° F), and avoid room furnishings that accumulate dust, especially if they cannot be washed in hot water. Allergic individuals should also leave the house while it is being vacuumed because vacuuming can actually increase airborne levels of mite allergens and other biological contaminants. Using central vacuum systems that are vented to the outdoors, or vacuums with high efficiency filters may also be of help.

    Take steps to minimize biological pollutants in basements. Clean and disinfect the basement floor drain regularly. Do not finish a basement below ground level unless all water leaks are patched and outdoor ventilation and adequate heat to prevent condensation are provided. Operate a dehumidifier in the basement, if needed, to keep relative humidity levels between 30% to 50%.

    Dave Park
    Advantage Home Inspection Raleigh
    Davepark@advantageinspection.com

    Advantage Home Inspection Raleigh. . . performs the Nation’s Best Home Inspection and provides the Nation’s Only “No Denied Claims Warranty” available in the industry. For the last 20 years, Advantage Home Inspection has been the deciding factor for the people we serve: Buyers, Sellers, Real Estate Agents and Home Inspectors.

    Tags: , , , , , , , , , , , ,

  • Are you concerned about the effects on your health that may be related to biological pollutants in your home? Before you discuss your concerns with your doctor, you should know the answers to the following questions. This information can help the doctor determine whether your health problems may be related to biological pollution.

    • Does anyone in the family have frequent headaches, fevers, itchy and watery eyes, a stuffy nose, dry throat, or a cough? Does anyone complain of feeling tired or dizzy all the time? Is anyone wheezing or having difficulties breathing on a regular basis?
    • Did these symptoms appear after you moved into a new or different home?
    • Do the symptoms disappear when you go to school or the office or go away on a trip, and return when you come back?
    • Have you recently remodeled your home or done any energy-conservation work, such as installing insulation, storm windows, or weather stripping? Did your symptoms occur during or after these activities?
    • Does your home feel humid? Can you see moisture on the windows or on other surfaces, such as walls and ceilings?
    • What is the usual temperature in your home? Is it very hot or cold?
    • Have you recently had water damage?
    • Is your basement wet or damp?
    • Is there any obvious mold or mildew?
    • Does any part of your home have a musty or moldy odor?
    • Is the air stale?
    • Do you have pets?
    • Do your house plants show signs of mold?
    • Do you have air conditioners or humidifiers that have not been properly cleaned?
    • Does your home have cockroaches or rodents?

    Infectious diseases caused by bacteria and viruses, such as the flu, measles, chicken pox, and tuberculosis, may be spread indoors. Most infectious diseases pass from person to person through physical contact. Crowded conditions with poor air circulation can promote this spread. Some bacteria and viruses thrive in buildings and circulate through indoor ventilation systems. For example, the bacterium causing Legionnaire’s Disease, a serious and sometimes lethal infection, and Pontiac Fever, a flu-like illness, have circulated in some large buildings.

    Toxic reactions are the least studied or understood health problem caused by some biological air pollutants in the home. Toxins can damage a variety of organs and tissues in the body, including the liver, the central nervous system, the digestive tract, and the immune system.

    Checking Your Home

    There is no simple or cheap way to sample the air in your home to determine the level of all biological pollutants. Experts suggest that sampling for biological pollutants is not a useful problem-solving tool. Even if you had your home tested, it is almost impossible to know which biological pollutant(s) cause various symptoms or health problems. The amount of most biological substances required to cause disease is unknown and varies from one person to the next. Does this make the problem sound hopeless? On the contrary, you can take several simple, practical actions to help remove sources of biological pollutants, to help get rid of pollutants, and to prevent their return.

    Self-Inspection: A Walk Through Your Home

    Begin by touring your household. Follow your nose, and use your eyes. Two major factors help create conditions for biological pollutants to grow: nutrients and constant moisture with poor air circulation.

    1. Dust and construction materials, such as wood, wallboard and insulation, contain nutrients that allow biological pollutants to grow. Firewood also is a source of moisture, fungi and bugs.
    2. Appliances, such as humidifiers, kerosene and gas heaters, washers and clothes dryers, dishwashers and gas stoves, add moisture to the air.

    A musty odor, moisture on hard surfaces, and even water stains, may be caused by:

    • air-conditioning units;
    • basements, attics and crawlspaces;
    • bathrooms;
    • carpets;
    • heating and air-conditioning ducts;
    • humidifiers and dehumidifiers; and
    • refrigerator drip pans.

    What You Can Do About Biological Pollutants

    Before you give away the family pet or move, there are less drastic steps you can take to reduce potential problems. Properly cleaning and maintaining your home can help reduce the problem and may avoid interrupting your normal routine. People who have health problems, such as asthma, or who are allergic, may need to do this and more. Discuss this with your doctor.

    Moisture Control

    Water in your home can come from many sources. Water can enter your home by leaking or by seeping through basement floors. Showers and even cooking can add moisture to the air in your home. The amount of moisture that the air in your home can hold depends on the temperature of the air. As the temperature goes down, the air is able to hold less moisture. This is why, in cold weather, moisture condenses on cold surfaces (for example, drops of water form on the inside of a window). This moisture can encourage biological pollutants to grow.

    There are many ways to control moisture in your home:

    • Fix leaks and seepage. If water is entering the house from the outside, your options range from simple landscaping to extensive excavation and waterproofing. (The ground should slope away from the house.) Water in the basement can result from the lack of gutters or a water flow toward the house. Water leaks in pipes and around tubs and sinks can provide a place for biological pollutants to grow.
    • Put a plastic cover over dirt crawlspaces to prevent moisture from coming in from the ground. Be sure crawlspaces are well-ventilated.
    • Use exhaust fans in bathrooms and kitchens to remove moisture to the outside (not into the attic). Vent your clothes dryer to the outside.
    • Turn off certain appliances (such as humidifiers and kerosene heaters) if you notice moisture on windows and other surfaces.
    • Use dehumidifiers and air conditioners, especially in hot, humid climates, to reduce moisture in the air, but be sure that the appliances themselves don’t become sources of biological pollutants.
    • Raise the temperature of cold surfaces where moisture condenses. Use insulation and storm windows. (A storm window installed on the inside works better than one installed on the outside) Open doors between rooms (especially doors to closets which may be colder than the rooms) to increase circulation. Circulation carries heat to the cold surfaces Increase air circulation by using fans and by moving furniture from wall corners to promote air and heat circulation. Be sure that your house has a source of fresh air and can expel excessive moisture from the home.
    • Pay special attention to carpet on concrete floors. Carpet can absorb moisture and serve as a place for biological pollutants to grow. Use area rugs, which can be taken up and washed often. In certain climates, if carpet is to be installed over a concrete floor, it maybe necessary to use a vapor barrier (plastic sheeting) over the concrete and cover that with sub-flooring (insulation covered with plywood) to prevent a moisture problem.
    • Moisture problems and their solutions differ from one climate to another. The Northeast is cold and wet, the Southwest is hot and dry, the South is hot and wet, and the Western Mountain states are cold and dry. All of these regions can have moisture problems. For example, evaporative coolers used in the Southwest can encourage the growth of biological pollutants. In other hot regions, the use of air conditioners which cool the air too quickly may not be left running long enough to remove excess moisture from the air. The types of construction and weather for the different climates can lead to different problems and solutions.

    Where Biological Pollutants May Be Found in the Home

    • dirty air conditioners;
    • dirty humidifiers and/or dehumidifiers;
    • bathroom without vents or windows;
    • kitchen without vents or windows;
    • dirty refrigerator drip pans;
    • laundry room with an unvented dryer;
    • an unventilated attic;
    • carpet on damp basement floor;
    • bedding;
    • closet on outside wall;
    • dirty heating/air-conditioning system;
    • pets; and
    • water damage (around windows, the roof, the basement).

    Maintain and Clean All Appliances that Come in Contact with Water

    • Have major appliances, such as furnaces, heat pumps and central air conditioners, inspected regularly by a professional InterNACHI inspector. Change filters on heating and cooling systems according to manufacturer’s directions. (In general, change filters monthly during use.) When first turning on the heating or air conditioner at the start of the season, consider leaving your home until it airs out.
    • Have window and wall air-conditioning units cleaned and serviced regularly by a professional, especially before the cooling season. Air conditioners can help reduce the entry of allergy-causing pollen. But they may also become a source of biological pollutants if not properly maintained. Clean the coils and rinse the drain pans, according to the manufacturer’s instructions, so water cannot collect in pools.
    • Have furnace-attached humidifiers cleaned and serviced regularly by a professional, especially before the heating season.
    • Follow the manufacturer’s instructions when using any type of humidifier. Experts differ on the benefits of using humidifiers. If you do use a portable humidifier (approximately 1- to 2-gallon tanks), be sure to empty its tank every day and refill it with distilled or demineralized water, or even fresh tap water, if the other types of water are unavailable. For larger portable humidifiers, change the water as recommended by the manufacturer. Unplug the appliance before cleaning. Every third day, clean all surfaces coming in contact with water with a 3% solution of hydrogen peroxide, using a brush to loosen deposits. Some manufacturers recommend using diluted household bleach for cleaning and maintenance, generally in a solution of one-half cup bleach to 1 gallon of water. With any household chemical, rinse well to remove all traces of chemical before refilling the humidifier.
    • Empty dehumidifiers daily and clean often. If possible, have the appliance drip directly into a drain. Follow manufacturer’s instructions for cleaning and maintenance. Always disconnect the appliance before cleaning.
    • Clean refrigerator drip pans regularly, according to manufacturer’s instructions. If refrigerator and freezer doors don’t seal properly, moisture may build up and mold can grow. Remove any mold on door gaskets, and replace faulty gaskets.

    Clean Surfaces

    • Clean moist surfaces, such as showers and kitchen counters.
    • Remove mold from walls, ceilings, floors and paneling. Do not simply cover mold with paint, stain, varnish, or a moisture-proof sealer, as the mold may resurface.
    • Replace moldy shower curtains, or remove them and scrub them well with a household cleaner, and rinse them before rehanging them.

    Dust Control

    Controlling dust is very important for people who are allergic to animal dander and mites. You cannot see mites, but you can either remove their favorite breeding grounds or keep these areas dry and clean. Dust mites can thrive in sofas, stuffed chairs, carpets and bedding. Open shelves, fabric wallpaper, knickknacks, and venetian blinds are also sources of dust mites. Dust mites live deep in the carpet and are not removed by vacuuming. Many doctors suggest that their mite-allergic patients use washable area rugs rather than wall-to-wall carpet.

    • Always wash bedding in hot water (at least 130° F) to kill dust mites. Cold water won’t do the job. Launder bedding at least every seven to 10 days.
    • Use synthetic or foam rubber mattress pads and pillows, and plastic mattress covers, if you are allergic. Do not use fuzzy wool blankets, feather or wool-stuffed comforters, and feather pillows.
    • Clean rooms and closets well. Dust and vacuum often to remove surface dust. Vacuuming and other cleaning may not remove all animal dander, dust mite material, and other biological pollutants. Some particles are so small, they can pass through vacuum bags and remain in the air. If you are allergic to dust, wear a mask when vacuuming and dusting. People who are highly allergy-prone should not perform these tasks. They may even need to leave the house when someone else is cleaning.

    Dave Park
    Advantage Home Inspection Raleigh
    Davepark@advantageinspection.com

    Advantage Home Inspection Raleigh. . . performs the Nation’s Best Home Inspection and provides the Nation’s Only “No Denied Claims Warranty” available in the industry. For the last 20 years, Advantage Home Inspection has been the deciding factor for the people we serve: Buyers, Sellers, Real Estate Agents and Home Inspectors.

    Tags: , , , , , , , , , , , , ,

  • It is normal to find mold spores in a homes indoor air and surfaces such as clothes, walls, and furniture. Most of the time mold spores found indoors are from outside sources. Regular housekeeping cleaning helps keep mold levels low. Cleaning small areas of visible mold, like the mold around your shower, is obligatory to maintain sanitary conditions.

    When you should be more concerned is when your home has a large-scale of active mold growing. Such problems are most likely to happen when there’s been an on-going water leak, flood, or excessively high levels of humidity in the home. Indoor mold growth may lead to high levels of airborne mold spores, which, in turn, can trigger the spread of mold growth from the original source to additional areas of the home having high moisture levels.

    Extensive mold growth will damage your home and furnishings, like carpets, sofas and cabinets. Over a period of time, uncontrolled mold growth can even instigate damage to structural elements of your home. While there is no practical way to eliminate all mold and mold spores in the indoor environment, keeping your home clean and dry can avert extensive mold growth and the ensuing damage.

    Damage to your home and possessions is not the only reason to be concerned with mold. Although most people are exposed to small amounts of mold or their spores on a daily basis without apparent harm, mold is an unsanitary condition that may present potential health risks to certain individuals.

    Possible adverse health effects produced by molds can include allergic, irritating, or toxigenic effects, and even infections, allergic reactions being the most common. Symptoms reported by affected people include: respiratory conditions, such as wheezing, difficulty breathing, and shortness of breath, sneezing and/or nasal congestion, eye and/or throat irritation, headaches and fatigue.

    Here are a few tips to keep moisture from becoming a breeding ground in your home for molds.

    1. Ensure that bathrooms, dryers and other moisture-creating sources are vented to the outside

    2. Take care not to block any of your house’s air conditioning vents

    3. Install de-humidifiers in basements and crawlspaces.

    4. Use your kitchen’s exhaust fans when cooking

    5. Install insulation on cold surfaces like piping, air ducts or basement walls to lessen possibilities of condensation

    6. Install moisture sensor alarms in potential water back-up and overflow areas to alert you when a leak occurs.

    Dave Park
    Advantage Home Inspection Raleigh
    Davepark@advantageinspection.com

    Advantage Home Inspection Raleigh. . . performs the Nation’s Best Home Inspection and provides the Nation’s Only “No Denied Claims Warranty” available in the industry. For the last 20 years, Advantage Home Inspection has been the deciding factor for the people we serve: Buyers, Sellers, Real Estate Agents and Home Inspectors.

    Tags: , , , , , , ,

  • “Something in the air” takes on a whole new meaning today than that magic spring night in the 60’s or the Tom Petty song.  Mold, Fungi, Radon, Chinese Drywall and now PCBs.

    Polychlorinated biphenyls or PCB’s have been around since the 1940’s.  They where manmade chemicals that were widely used in construction materials and electrical products.  They were banned by Congress in 1976 because of a “concern” about their health and environmental effects. 

    The use and disposal of PCBs before the phase-out resulted in their widespread presence in our soil, air, water and food. Despite the federal ban, they remain present today in caulking and sealants used in the construction or renovation of older buildings before 1978.

    So why did the EPA announce guidance about this cancer causing chemical in September of 09?

    The U. S. Environmental Protection Agency “announced a series of steps that building owners and public school administrators should take to reduce exposure to PCBs that may be found in caulk in many buildings constructed or renovated between 1950 and 1978. 

    tom-petty-on-stage[1]

    Call out the instigator
    Because there’s something in the air
    We’ve got to get together sooner or later
    Because the revelution is here!
     
    . . .

    The press release acknowledged the growing amounts of evidence of levels of PCBs in caulk used in older buildings with discussion as to the health concerns related to this “banned” cancer causing chemical. 

    But, the press release seemed to be carefully crafted such that it did not use the words “must” or “shall” in their discussion for actions and related testing.

    Is this a serious issue? 

    Also the “EPA recommends testing peeling, brittle, cracking or deteriorating caulk for the presence of PCBs and removing the caulk if the PCBs are present at significant levels . . .”

    In referring to high air test levels, the EPA also stated that “building owners should be “especially vigilant” in implementing and monitoring ventilation and hygienic practices to minimize exposures . . . ”

    How are people exposed to PCBs?

    Though PCBs were banned from production in 1978, they still typically exist in low-levels in our environment.  They are in the food we eat, the air we breathe and in dirt and dust outside.  They build up in our bodies over many years.

    This long-term build-up of PCBs is what potentially causes harm. The levels of PCBs in our environment and in the bodies of people in this country have decreased significantly over time.

    So why all the fuss now?

    Food is a main source of exposure to PCBs. Fish (especially fish caught in polluted waters) contains small amounts of PCBs, as do meat and dairy products.

    Indoor air and dust may also be a significant source of PCB exposure from PCB-contaminated caulk, electrical products, other building materials or products that contain PCBs.

    What about caulk in single-family houses or other places? epa-1[1]

    EPA has found PCBs in large scale apartment complexes and public buildings. To date, EPA has not found PCBs in caulk in single-family houses.  They do note that generally air concentrations are below the public health exposure levels developed by EPA.

    Run through the fields and the houses
    Because there is something in the air
    We’ve got to get together sooner or later
    Because the Revolution is here!
    . . .

    - Tom Petty

     So where does this leave you?

    Unless you sleep with old caulk gun, lick your window sills or snort contaminated dust,  PCBs should not be a great concern.  On the other hand if you work or live in a room where window caulk is peeling and falling on the floor, call an inspector for testing and recommendations before you “break out” into a song . . . you heartbreaker you!

     Advantage Inspection Raleigh

    . . .  performs the Nation’s Best Home Inspection and provides the Nation’s Only “No Denied Claims Warranty” available in the industry. For the last 18 years, Advantage Inspection has been the deciding factor for the people we serve:  Buyers, Sellers, Real Estate Agents and Home Inspectors.  Advantage Inspection Raleigh serves Raleigh, Durham and the Triangle area.
     

    Dave Park 

    Advantage Home Inspection Raleigh
    more than just an inspection company!”
    www.adrdu.com

    Full Press Release http://www.epa.gov/pcbsincaulk

    Tags: , , , , , , , , ,

  • leagueoftheirownMolds are ubiquitous in nature, and mold spores are a common component of household and workplace dust. However, when spores are present in large quantities, they can be a health hazard to humans, potentially causing allergic reactions and respiratory problems.

    Molds and fungi are found everywhere inside and outside, and can grow on almost any substance when moisture is present. When molds reproduce they make spores, which can be carried by air currents. When these spores land on a moist surface that is suitable for life, they begin to grow. Mold is normally found indoors at levels that do not affect most healthy individuals.

    Because common building materials are capable of sustaining mold growth, and mold spores are ever-present, mold growth in an indoor environment is typically related to water or moisture indoors.

    Mold growth may also be caused by incomplete drying of flooring materials such as concrete. Flooding, leaky roofs, building maintenance problems, plumbing problems can all lead to mold growth inside homes, offices, clubhouses, and other areas humans gather.

    For significant mold growth to occur, there must be a source of water (which could be invisible humidity), a source of food and a substrate (material) capable of sustaining growth. Common building materials, such as plywood, drywall, furring strips, carpets and carpet padding are food for molds. In carpet, invisible dust and cellulose are the food sources. After a single incident of water damage occurring in a building, molds grow inside the walls. The right conditions, such as high humidity, can activate a mold bloom even after a long period of being dormant after the event has occurred.

     moldspore-smaller

    If there are mold problems in a unit or home only during a certain time of the year, then it is probably either too air-tight or too drafty. Mold problems occur in airtight homes more frequently in the warmer months (when humidity reaches high levels inside the house and moisture is trapped) and occur in drafty units or homes more frequently during the colder months (when warm air escapes from the living area into unconditioned space and condenses). If a house is artificially humidified during the winter, this can create conditions favorable to mold. Moving air may prevent mold from growing since it has the same effect as lowering humidity.

    Assessment

    The first step in an assessment is to determine if mold is present. This is done by visually examining the premises. If mold is growing and visible this helps determine the level of remediation that is necessary. If mold is actively growing and is visibly confirmed, sampling for specific species of mold is necessary.

     These methods, considered non-intrusive, only detect visible and odor-causing molds. Sometimes more intrusive methods are needed to assess the level of mold contamination. This would include moving furniture, lifting and/or removing carpets, checking behind wallpaper or paneling, checking in ventilation duct work, opening and exposing wall cavities, etc.

     Careful detailed visual inspection and recognition of moldy odors should be used to find problems needing correction. Efforts should focus on areas where there are signs of liquid moisture or water vapor (humidity) or where moisture problems are suspected. The investigation goals should be to locate indoor mold growth to determine how to correct the moisture problem and remove contamination safely and effectively.

    RemediationMercury7astronauts-700195

    The first step in solving an indoor mold problem is stopping the source of moisture. Next is to remove the mold growth. Common remedies for small occurrences of mold include:

    *Sunlight

    *Ventilation

    *Non-porous building materials

    *Household cleansers

    Significant mold growth may require professional mold remediation and removal of affected building materials. As this issue has become more and more prevalent, different states have different requirements for licensing, certifying and qualifying mold remediation technicians. 

    There are Certified Mold Inspectors, Certified Mold Remediators, and Certified Environmental Hygienists, all professionals that provide services relating to mold problems. While some mild instances of mold may be able to be addressed in a do-it-yourself way, if in doubt, a professional should be engaged for this purpose. The preparation of the area for the removal of the material, the disposal of the material removed, the personal precautions that are required, generally exceed those of a maintenance worker or handyman.

    If in doubt, call a professional.

    Maverick Rules!

     

    Advantage Inspection Raleigh performs the Nation’s Best Home Inspection and provides the Nation’s Only No Denied Claims Warranty available in the industry. 

    For the last 18 years, Advantage Inspection has been the deciding factor for the people we serve:  Buyers, Sellers, Real Estate Agents and Home Inspectors.  Advantage Inspection Raleigh serves Raleigh, Durham and the Triangle area. 

     Advantage Inspection Raleigh

    more than just an inspection company!”

    www.adrdu.com

    Tags: , , , , , , , , , , ,

   

Recent Comments

  • anybunny.mobi/latest/ anybunny.mobi/latest/
  • ...Recent Blogroll Additions [...]The full look of your web...
  • ...Recent Blogroll Additions [...]The full look of your web...
  • ...Links [...]I am no longer certain the place you're getti...
  • ... [Trackback] [...]Wow, marvelous weblog format! How leng...