• Nine Dishonest Sales Practices

    Here are some of the practices avoided by reliable sales operations. Watch out for them and exercise sales resistance if you suspect they are occurring:

    1. concealing or misrepresenting facts about current and resale value. Sales agents may present general facts about the area’s population growth, industrial or residential development, and real estate price levels as if they apply to your specific lot. You may be encouraged to believe that your piece of land represents an investment which will increase in value as regional development occurs. A sales agent may tell you that the developer will re-sell the lot, if you request. This promise may not be kept. Future resale is difficult or impossible in many promotional developments because much of your purchase price — sometimes as much as 40% — has gone for an intensive advertising campaign and commissions for sales agents. You are already paying a top price and it is unlikely that anyone else would pay you more than you are paying the developer. You may even have to sell for less than the price you originally paid for the lot. Sales promotions often are conducted in a high-pressure atmosphere. Furthermore, when you attempt to sell your lot, you are in competition with the developer, who probably holds extensive, unsold acreage in the same subdivision. In most areas, real estate brokers find it impractical to undertake the sale of lots in subdivisions and will not accept such listings. It is unlikely that the lot you purchase through interstate land sales represents an investment, in the view of professional land investors. Remember, the elements of value of a piece of land are its usefulness, the supply, the demand, and the buyer’s ability to re-sell it. The Urban Land Institute estimates that land must double in value every five years to justify holding it as an investment. In some areas, the cost of holding the land, such as taxes and other assessments, can run as high as 11% a year. Millennium Properties R/E is a trustworthy firm providing the highest level of service.
    The resale value of your house can be effected by pests that you haven’t spotted in the house. White Horse Pest Management emphasizes that you will have to take immediate action and reclaim your home. Otherwise, a pest problem will undoubtedly turn your life upside down, If you have a pest in your home be sure to hire the best pest removal company in your area.

    2. failure to honor refund promises or agreements. Some sales promotions conducted by mail, email or long-distance telephone include the offer of a refund if the property has been misrepresented, or if the customer inspects the land within a certain period of time and decides not to buy. When the customers request the refund, s/he may encounter arguments about the terms of the agreement. The company may even accuse its own agent of having made a money-back guarantee without the consent or knowledge of the developer. Sometimes, the promised refund is made, but only after a long delay. Getting a new house may be challenging, especially settling in. You should consider getting an air puifier but i you are not sure which one to get, then check out these best air purifier reviews.

    4. failure to develop the subdivision as planned. Many buyers rely upon the developer’s contractual agreement or a verbal promise to develop the subdivision in a certain way. The promised attractions that influenced your purchase (golf course, marina, swimming pool, etc.) may never materialize after you become an owner. If they are provided, it may be only after a long delay. If you are planning on immediate vacation use of the property, or are working toward a specific retirement date, you may find that the special features promised of the development are not available when you need them.3. misrepresentation of facts about the subdivision. This is where the property report offers an added measure of protection. A sales agent may offer false or incomplete information relating to either a distant subdivision or one which you visit. Misrepresentations often relate to matters such as the legal title, claims against it, latent dangers (such as swamps or cliffs), unusual physical features (such as poor drainage), restrictions on use, or lack of necessary facilities and utilities. According to experts like Stith Plumbing & HVAC, it is always good to have the contact of a local drainage and plumbing contractor. If you are one of those having this issue at home, this is a great post to read and a team like Nance Services can help you with any plumbing concern that you might have. You can find out more here.

    So, if you’re suffering from blocked drains Kent, you can have everything fixed in no time. Check out this link if you need help finding professionals for the job. Read the property report carefully with an eye to omissions, generalizations, or unproved statements that may tend to mislead you. If you are concerned about overlooking something important, discuss the report and the contract with a lawyer who understands real estate matters, and you can find good lawyer resources for this at sites like www.gibsonhugheslaw.com/law-firm/ that offer their services online. The developer also may use advertisements that imply that certain facilities and amenities are currently available when they are not. Read the property report to determine whether these facilities and amenities are actually completed, or proposed to be completed in the future. If the company advertises sales on credit terms, the Truth in Lending Act requires the sales contract to fully set forth all terms of financing. This information must include total cost, simple annual interest, and total finance charges.

    5. failure to deliver deeds and/or title insurance policies. Documents relating to the sales transaction may not be delivered as promised. Some sales in the promotional land development industry are made by contract for a deed to be delivered when the purchaser makes the last payment under the terms of the contract. A dishonest developer may fail to deliver the deed, or deliver it only after a long delay. A sales agent may offer false or incomplete information.  If you need insurance fast, then contact professionals to get an insurance quote.

    6. abusive treatment and high-pressure sales tactics. Some sales agents drive prospective customers around a subdivision in automobiles equipped with citizen band radios which provide a running commentary on lot sales in progress. The customer may be misled by this and other sales techniques to believe that desirable lots are selling rapidly and that a hurried choice must be made. Hurrying the buyers into a purchase they may later regret is only one ploy of high-pressure sales agents. More offensive is abusive language used to embarrass customers who delay an immediate decision to buy. In some instances, hesitant buyers have been isolated in remote or unfamiliar places where transportation is controlled by the sales agent or the agent’s organization.

    7. failure to make good on sales inducements. Free vacations, gifts, savings bonds, trading stamps, and other promised inducements are used to lure people to sales presentations or to development sites. These promised treats may never materialize. Sometimes, special conditions are attached to the lure, or a customer is advised that gifts go only to lot purchasers. A “free vacation” may be the means of delivering the prospective buyer to a battery of high-pressure sales agents in a distant place. The promised attractions may never materialize.

    8. “bait and switch” tactics. Lots are frequently advertised at extremely low prices. When prospective buyers appear, they are told that the low-priced lots are all sold and then are pressured to buy one that is much more expensive. If the cheaper lot is available, it may be located on the side of a cliff or in another inaccessible location. If accessible, it may be much too small for a building or have other undesirable features. The buyers may be lured to the property with a certificate entitling them to a “free” lot. Often, the certificate bears a face value of $500 to $1,000. If the buyers attempt to cash it in, the amount is simply included in the regular price (often inflated) of the lot they choose. Often, this so-called “bait and switch” technique has a delayed fuse. Buyers who purchase an unseen lot for later retirement may be unpleasantly surprised when they visit the development. The lot they have paid for may be remote from other homes, shopping and medical facilities. It may be insufficiently developed for use. When the buyers complain, sales personnel attempt to switch them to a more expensive lot, applying the money paid for the original lot to an inflated price for the new one, and tacking on additional financing charges. If the unhappy purchasers lack sufficient funds to accept this alternative, they are left with an unusable, unmarketable first choice. Also they sell houses with very bad appliances and sometimes it’s very expensive to get Appliance repair, so try to avoid these situations and talk with professionals.

    9. failure to grant rights under the Interstate Land Sales Full Disclosure Act. Purchasers may not be given copies of the property report before they sign a sales contract. Some sales agents withhold this detailed statement until customers choose a specific lot. Sometimes, the buyers receive the report in a mass of promotional materials and legal documents. Unaware that the report is in their possession, they fail to read and understand it before signing a sales contract.

    Dave Park
    Advantage Home Inspection Raleigh
    Davepark@advantageinspection.com

    Advantage Home Inspection Raleigh. . . performs the Nation’s Best Home Inspection and provides the Nation’s Only “No Denied Claims Warranty” available in the industry. For the last 20 years, Advantage Home Inspection has been the deciding factor for the people we serve: Buyers, Sellers, Real Estate Agents and Home Inspectors.

    This month I want to let you know about a great serive in Triangle area.  Leaf and Limb Tree Service.  A professional service that helps you get rid of dead trees and keeps your home safe and property values up.  They offer free estimates and scheduling is easy.  For all your Raleigh Tree Removal needs, call Leaf and Limb Tree Service.

    The above article was reprinted with the permission from the National Association of Cerfitied Home Inspectors.

     

    Tags: , , , , , , , ,

  • Health Effects From Biological Contaminants

     

    Some biological contaminants trigger allergic reactions, including hypersensitivity pneumonitis, allergic rhinitis, and some types of asthma. Infectious illnesses, such as influenza, measles and chicken pox, are transmitted through the air. Molds and mildews release disease-causing toxins. Symptoms of health problems caused by biological pollutants include sneezing, watery eyes, coughing, shortness of breath, dizziness, lethargy, fever and digestive problems. You may need to read this foundation repair guide before continuing to make sure theirs no biological leaks in your foundation.

    Allergic reactions occur only after repeated exposure to a specific biological allergen. However, that reaction may occur immediately upon re-exposure, or after multiple exposures over time. As a result, people who have noticed only mild allergic reactions, or no reactions at all, may suddenly find themselves very sensitive to particular allergens. Some diseases, such as humidifier fever, are associated with exposure to toxins from microorganisms that can grow in large buildings’ ventilation systems. However, these diseases can also be traced to micro-organisms that grow in home heating and cooling systems and humidifiers. Children, elderly people, and people with breathing problems, allergies, and lung diseases are particularly susceptible to disease-causing biological agents in the indoor air. Mold, dust mites, pet dander, and pest droppings or body parts can trigger asthma. WHAT ARE YOUR AIR CONDITIONER ERROR FAULT CODES TELLING YOU?. This website offers design build services that mitigate the risk of biological contamination. Biological contaminants, including molds and pollens, can cause allergic reactions for a significant portion of the population that’s why it is important to run regular air conditioning maintenance, you can always get a Blast auxiliary but read the Blast auxiliary reviews before to make sure this suits your life. Tuberculosis, measles, staphylococcus infections, Legionella and influenza are known to be transmitted by air. According to experts like T.E. Spall & Son, this is why it is extremely important to maintain your HVAC system and air conditioning repair regularly. So, if you need maintenance for you HVAC system, you can visit sites like airsheenservices.com/ac-repair-services-in-cedar-park-tx/ to get professional help. Read more about it here.

    Combustion Pollutants

    Combustion appliances are those which burn fuels for warmth, cooking or decorative purposes. Typical fuels are gas, both natural and liquefied petroleum (LP), kerosene, oil, coal and wood. Examples of the appliances are space heaters, ranges, ovens, stoves, furnaces, fireplaces, water heaters, and clothes dryers. These appliances are usually safe. However, under certain conditions, these appliances can produce combustion pollutants that can damage your health, or even kill you. This is why a furnace service from Energy Pro HVAC or other appliance service is needed to properly install your appliances.

    Commercial Garage Door Repairs in Plano are serious business. You rely on your Garage Doors, Rollup Doors, and Commercial Gates to keep operations running smoothly and on schedule. Broken equipment means reduced productivity, wasted time, and lost revenue. Thankfully, a damaged commercial garage door doesn’t have to slow you down. The commercial garage door pros at Metro Garage Door Repair in Plano are your local experts in Commercial Garage Door Installation and Repair.

    What are Combustion Pollutants?

    Combustion pollutants are gases and particles that come from burning materials (ref.: Salina Radon Mitigation). The combustion pollutants come from burning fuels in appliances. The types and amounts of pollutants produced depend on the type of appliance, how well the appliance is installed, maintained and vented, and the kind of fuel it uses. Some of the common pollutants produced from burning these fuels are carbon monoxide, nitrogen dioxide, particles, and sulfur dioxide. Particles can have hazardous chemicals attached to them. Other pollutants that can be produced by some appliances are unburned hydrocarbons and aldehydes. Combustion always produces water vapor. Water vapor is not usually considered a pollutant, but it can act as one. It can result in high humidity and wet surfaces.

    Where do Combustion Pollutants Come From?

    Combustion pollutants found indoors include outdoor air, tobacco smoke, exhaust from car and lawn mower internal combustion engines, and some hobby activities, such as welding, woodburning and soldering. Combustion pollutants can also come from vented or unvented combustion appliances. These appliances include space heaters, gas ranges and ovens, furnaces, gas water heaters, gas clothes dryers, wood and coal-burning stoves, and fireplaces. As a group, these are called “combustion appliances.”

    Appliances

    As the specialist explained, vented appliances are appliances designed to be used with a duct, chimney, pipe, or other device that carries the combustion pollutants outside the home. These appliances can release large amounts of pollutants directly into your home if a vent is not properly installed, or is blocked or leaking. Unvented appliances do not vent to the outside, so they release combustion pollutants directly into the home. Many of these problems are hard for a homeowner to identify. A professional like JackRabbit Air Conditioning for Air duct Repair is needed.

    What are the Health Effects of Combustion Pollutants?

    The health effects of combustion pollutants range from headaches and breathing difficulties to death. The health effects may show up immediately after exposure, or occur after being exposed to the pollutants for a long time. The effects depend on the type and amount of pollutants, and the length of time of exposure to them. They also depend upon several factors related to the exposed person. These include the age and any existing health problems. There are still some questions about the level of pollutants or the period of exposure needed to produce specific health effects. Further studies to better define the release of pollutants from combustion appliances and their health effects are needed.

    The sections below discuss health problems associated with some common combustion pollutants. These pollutants include carbon monoxide, nitrogen dioxide, particles, and sulfur dioxide. Even if you are healthy, high levels of carbon monoxide can kill you within a short time. The health effects of the other pollutants are generally more subtle and are more likely to affect susceptible people. It is always a good idea to reduce exposure to combustion pollutants by using and maintaining combustion appliances properly. Call Lake Country Repair provides heating and cooling repair in Mequon WI that can fix damages.

    Carbon Monoxide:

    Each year, according to CPSC, there are more than 200 carbon monoxide deaths related to the use of all types of combustion appliances in the home. Exposure to carbon monoxide reduces the blood’s ability to carry oxygen. Often, a person or an entire family may not recognize that carbon monoxide is poisoning them. The chemical is odorless, and some of the symptoms are similar to common illnesses. This is particularly dangerous because carbon monoxide’s deadly effects will not be recognized until it is too late to take action against them. Carbon monoxide exposures especially affect unborn babies, infants, and people with anemia or a history of heart disease. Breathing low levels of the chemical can cause fatigue and increase chest pain in people with chronic heart disease. Breathing higher levels of carbon monoxide causes symptoms such as headaches, dizziness, and weakness in healthy people. Carbon monoxide also causes sleepiness, nausea, vomiting, confusion and disorientation. At very high levels, it causes loss of consciousness and death.

    Nitrogen Dioxide:

    Breathing high levels of nitrogen dioxide causes irritation of the respiratory tract and causes shortness of breath. Compared to healthy people, children, and individuals with respiratory illnesses such as asthma, may be more susceptible to the effects of nitrogen dioxide. Some studies have shown that children may have more colds and flu when exposed to low levels of nitrogen dioxide. When people with asthma inhale low levels of nitrogen dioxide while exercising, their lung airways can narrow and react more to inhaled materials.

    Particles:

    Particles suspended in the air can cause eye, nose, throat and lung irritation. They can increase respiratory symptoms, especially in people with chronic lung disease or heart problems. Certain chemicals attached to particles may cause lung cancer, if they are inhaled. The risk of lung cancer increases with the amount and length of exposure. The health effects from inhaling particles depend upon many factors, including the size of the particle and its chemical make-up.

    Sulfur Dioxide:

    Sulfur dioxide at low levels of exposure can cause eye, nose, and respiratory tract irritation. At high exposure levels, it causes the lung airways to narrow. This causes wheezing, chest tightness, and breathing problems. People with asthma are particularly susceptible to the effects of sulfur dioxide. They may have symptoms at levels that are much lower than the rest of the population.

    Other Pollutants:

    Combustion may release other pollutants. They include unburned hydrocarbons and aldehydes. Little is known about the levels of these pollutants in indoor air and the resulting health effects.

    What do I do if I suspect that combustion pollutants are affecting my health?

    If you suspect you are being subjected to carbon monoxide poisoning, get fresh air immediately. And one of the best ways to improve any room is to use quality blinds and the best quality that we have ever had were from these blinds fitters in Nottingham as they installed some wonderful blinds for us that we are still very happy with. Open windows and doors for more ventilation, turn off any combustion appliances, and leave the house. You could lose consciousness and die from carbon monoxide poisoning if you do nothing. It is also important to contact a doctor immediately for a proper diagnosis. Remember to tell your doctor that you suspect carbon monoxide poisoning is causing your problems. Prompt medical attention is important. Some symptoms from combustion pollutants — including headaches, dizziness, sleepiness, coughing, and watery eyes — may also occur because of common medical problems. These medical problems include colds, the flu, and allergies. Similar symptoms may also occur because of other indoor air pollutants. Contact your doctor for a proper diagnosis.

    How can I reduce my exposure to combustion pollutants?

    Proper selection, installation, inspection and maintenance of your appliances are extremely important in reducing your exposure to these pollutants. Providing good ventilation in your home and correctly using your appliance can also reduce your exposure to these pollutants. Additionally, there are several different residential carbon monoxide detectors for sale. These detectors alert consumers to harmful carbon monoxide levels in the home. They may soon be widely available to reduce deaths from carbon monoxide poisoning.

    Appliance Selection

    • Choose vented appliances whenever possible.
    • Buy only combustion appliances that have been tested and certified to meet current safety standards. Examples of certifying organizations are Underwriters Laboratories (UL) and the American Gas Association (AGA) Laboratories. Look for a label that clearly shows the certification.
    • All currently manufactured vented gas heaters are required by industry safety standards to have a safety shut-off device. This device helps protect you from carbon monoxide poisoning by shutting off an improperly vented heater.
    • Check your local and state building codes and fire ordinances to see if you can use an unvented space heater, if you are considering purchasing one. They are not allowed to be used in some communities, dwellings, and certain rooms in the house.
    • If you must replace an unvented gas space heater with another, make it a new one. Heaters made after 1982 have a pilot light safety system called an oxygen depletion sensor (ODS). This system shuts off the heater when there is not enough fresh air, before the heater begins producing large amounts of carbon monoxide. Look for the label that tells you that the appliance has this safety system. Older heaters will not have this protection system. If you’re going to buy a modern heat pump, you can find heat pump installers in Hamilton here.
    • Consider buying gas appliances that have electronic ignitions rather than pilot lights. These appliances are usually more energy-efficient and eliminate the continuous low-level pollutants from pilot lights.
    • Buy appliances that are the correct size for the area you want to heat. Using the wrong size heater may produce more pollutants in your home and is not an efficient use of energy.
    • All new wood stoves are EPA-certified to limit the amounts of pollutants released into the outdoor air. For more information on selecting, installing, operating, and maintaining wood-burning stoves, write to the EPA Wood Heater Program. Before buying a wood stove, check your local laws about the installation and use of wood stoves.

    Ventilation

    To reduce indoor air pollution, a good supply of fresh, outdoor air is needed. The movement of air into and out of your home is very important. Normally, air comes in through cracks around doors and windows so is better to get repairs from professionals window fitters from this different resources online. This air helps reduce the level of pollutants indoors. This supply of fresh air is also important to help carry pollutants up the chimney, stovepipe or flue to the outside.

    • Keep doors open to the rest of the house from the room where you are using an unvented gas space heater or kerosene heater, and crack open a window. This allows enough air for proper combustion, and reduces the level of pollutants, especially carbon monoxide.
    • Use a hood fan if you are using a range. They reduce the level of pollutants you breathe if they exhaust to the outside. Make sure that enough air is coming into the house when you use an exhaust fan. If needed, open a door or window slightly, especially if other appliances are in use. For proper operation of most combustion appliances and their venting systems, the air pressure in the house should be greater than that outside. If not, the vented appliances could release combustion pollutants into the house rather than outdoors. If you suspect that you have this problem, you may need the help of a qualified person to solve it.
    • Make sure that your vented appliance has the vent connected and that nothing is blocking it. Make sure there are no holes or cracks in the vent. Do not vent gas clothes dryers or water heaters into the house for heating. This is unsafe.
    • Open the stove’s damper when adding wood. This allows more air into the stove. More air helps the wood burn properly, and prevents pollutants from being drawn back into the house instead of going up the chimney. If there is isible smoke or a constant smoky odor inside the home while using a wood-burning stove, this is a sign that the stove is not working properly. Soot on furniture in the rooms where you are using the stove also tells this. You should definitely do something about this, unless you are aiming for an antiquated look of furniture check us out. Smoke and soot are signs that the stove is releasing pollutants into the indoor air.

    Correct Use of Appliances

    • Read and follow the instructions for all appliances so that you understand how they work. Keep the owner’s manual in a convenient place to refer to when needed. Also, read and follow the warning labels because they tell you important safety information that you need to know. Reading and following the instructions and warning labels could save your life.
    • Always use the correct fuel for the appliance.
    • Use only water-clear ASTM 1-K kerosene for kerosene heaters. The use of kerosene other than 1-K could lead to a release of more pollutants in your home. Never use gasoline in a kerosene heater because it can cause a fire or an explosion. Using even small amounts of gasoline could cause a fire.  That’s why  have  to be alert and need to install automatic fire suppression system with the help of ph el.
    • Use seasoned hardwoods (elm, maple, oak) instead of softwoods (cedar, fir, pine) in wood-burning stoves and fireplaces. Hardwoods are better because they burn hotter and form less creosote, an oily, black tar that sticks to chimneys and stove pipes. Do not use green or wet woods as the primary wood because as for hardwood floors is important to keep them  clean. You can try contacting Modern Tiling services, as they can renovate your bathroom and kitchen. Never burn painted scrap wood or wood treated with preservatives, because they could release highly toxic pollutants, such as arsenic or lead. Plastics, charcoal, and colored paper, such as comics and wrapping paper, also produce pollutants. Never burn anything that the stove or fireplace manufacturer does not recommend.
    • Never use a range, oven or dryer to heat your home. When you misuse gas appliances in this way, they can produce fatal amounts of carbon monoxide. They can produce high levels of nitrogen dioxide, too.
    • Never use an unvented combustion heater overnight or in a room where you are sleeping. Carbon monoxide from combustion heaters can reach dangerous levels.
    • Never ignore a safety device when it shuts off an appliance. It means that something is wrong. Read your appliance instructions to find out what you should do, or have a professional check out the problem.
    • Never ignore the smell of fuel. This usually indicates that the appliance is not operating properly or is leaking fuel. Leaking fuel will not always be detectable by smell. If you suspect that you have a fuel leak, have it fixed as soon as possible. In most cases, you should shut off the appliance, extinguish any other flames or pilot lights, shut off other appliances in the area, open windows and doors, call for help, and leave the area.

    Inspection and Maintenance

    Have your combustion appliance regularly inspected and maintained to reduce your exposure to pollutants. Appliances that are not working properly can release harmful and even fatal amounts of pollutants, especially carbon monoxide. Have chimneys and vents inspected when installing or changing vented heating appliances. Some modifications may be required. For example, if a change was made in your heating system from oil to natural gas, the flue gas produced by the gas system could be hot enough to melt accumulated oil-combustion debris in the chimney or vent. This debris could block the vent, forcing pollutants into the house. It is important to clean your chimney and vents, especially when changing heating systems. Always hire an InterNACHI inspector to perform your home inspections, as they all must pass the most comprehensive, rigorous training program available.

    What are the Inspection and Maintenance Procedures?

    The best advice is to follow the recommendations of the manufacturer. The same combustion appliance may have different inspection and maintenance requirements, depending on where you live. In general, check the flame in the furnace combustion chamber at the beginning of the heating season. Natural gas furnaces should have a blue flame with perhaps only a slight yellow tip. Call your appliance service representative to adjust the burner if there is a lot of yellow in the flame, or call your local utility company for this service. LP units should have a flame with a bright blue center that may have a light yellow tip. Pilot lights on gas water heaters and gas cooking appliances should also have a blue flame. Have a trained service representative adjust the pilot light if it is yellow or orange. Before each heating season, have flues and chimneys inspected before each heating season for leakage and for blockage by creosote or debris. Creosote buildup or leakage could cause black stains on the outside of the chimney or flue. These stains can mean that pollutants are leaking into the house.

    Dave Park
    Advantage Home Inspection Raleigh
    Davepark@advantageinspection.com

    Advantage Home Inspection Raleigh. . . performs the Nation’s Best Home Inspection and provides the Nation’s Only “No Denied Claims Warranty” available in the industry. For the last 20 years, Advantage Home Inspection has been the deciding factor for the people we serve: Buyers, Sellers, Real Estate Agents and Home Inspectors.

    Tags: , , , , , , , , , , , , ,

  • Before You Move

     

    Protect yourself by hiring a Licensed Home Inspector to inspect your potential new home. If you identify problems, have the landlord or seller correct them before the moving company delivers all your boxes into the new home / when you consider moving elsewhere. Allow thе moving company tо dо еvеrу lаѕt thіng уоu dо nоt intend tо dо. Allow thеm dismantle еvеrу lаѕt bed іn уоur home аѕ wеll аѕ reassemble іt іn уоur brand-new place. Don’t like tо load? Permit thе moving company tо pack еvеrу lаѕt item іn уоur home оr apartment. Sоmеtіmеѕ thеу wіll nоt tell уоu, hоwеvеr іf уоu ask thеу wіll pack уоur products fоr уоu wіth nо added fee. Yоu merely spend fоr boxes уоu require. If уоu hаvе ѕоmеthіng vеrу dear tо уоu, I wоuld pack thаt myself оr let thе moving company understand tо uѕе extra safety measures keeping thаt certain belonging safe аnd secured. ADTmoving offers you the best moving service. Try out turkesterone.

    • Have professionals like General Air Conditioning & Plumbing to improve your indoor air quality by checking the heating and cooling system, including humidifiers and natural commercial ventilation systems. According to experts like Sirius Plumbing and Air Conditioning, have duct lining and insulation checked for growth. Visit https://burichvac.com/ to see if they can cater your area. For additional air conditioning options visit AirNow HVAC.
    • Check for exhaust fans in bathrooms and kitchens. If there are no vents, do the kitchen and bathrooms have at least one window in each room? Does the stovetop have a hood vented outside? Does the clothes dryer vent outside? Do all vents exhaust to the outside of the building, and not in attics or crawlspaces?
    • Look for obvious mold growth throughout the house, including attics, basements and crawlspaces, and around the foundation outside. See if there are many plants close to the house, particularly if they are damp and rotting. They are a potential source of biological pollutants. Downspouts from roof gutters should route water away from the building. If your roof gutters aren’t working correctly seek the consult of roofing contractor, American Home Contractors. On LENOX ROOFING SOLUTIONS you will get best roofing service, They provide different type of roofing like residential or commercial roofing.
    • Look for rotted building materials, which may suggest moisture or water damage.
    • If you or anyone else in the family has a pet allergy, ask if any pets have lived in the home.
    • Examine the design of the building. Remember that in cold climates, overhanging areas, rooms over unheated garages, and closets on outside walls may be prone to problems with biological pollutants.
    • Look for signs of cockroaches. (Carefully read instructions for use and any cautionary labeling on cleaning products before beginning cleaning procedures.)
    • Look for stains on the walls, floor or carpet (including any carpet over residential concrete floors) as evidence of previous flooding or moisture problems. Is there moisture on windows and surfaces? Are there signs of leaks or seepage in the basement?
    • Humidity & moisture in garage. Well you can learn this here now selecting a better garage installer firm for maintaining quality, keeping them long lasting.
    • Do not mix any chemical products. Especially, never mix cleaners containing bleach with any product (such as ammonia) which does not have instructions for such mixing. When chemicals are combined, a dangerous gas can sometimes be formed.
    • Household chemicals may cause burning or irritation to skin and eyes.
    • Household chemicals may be harmful if swallowed or inhaled.
    • Avoid contact with skin, eyes, mucous membranes, and clothing.
    • Avoid breathing vapor. Open all windows and doors, and use an exhaust fan that sends the air outside. You should consider getting a Westral crimsafe screen for your door, if you dont want your door always open. This way you will have good ventilation.
    • Keep household chemicals out of reach of children.
    • Rinse treated surface areas well to remove all traces of chemicals.

    Correcting Water Damage

    What if damage is already done? Follow these guidelines for correcting water damage:

    • Throw out mattresses, wicker furniture, straw baskets and the like that have been water damaged or contain mold. These cannot be recovered. If there are we recommend you to check submersible sump pump online store.
    • Discard any water-damaged furnishings, such as carpets, drapes, stuffed toys, upholstered furniture, and ceiling tiles, unless they can be recovered by steam cleaning or hot-water washing and thorough drying.
    • Remove and replace wet insulation to prevent conditions where biological pollutants can grow.

    Reducing Exposure to Biological Contaminants

    According to experts like this team of HVAC contractors, general good housekeeping and maintenance of heating and air-conditioning equipment are very important. You can click here to go on Global Cooling to help you with any HVAC-related issue. Adequate ventilation and good air distribution also help. Check it out here. The key to mold control is moisture control. If mold is a problem, clean up the mold and get rid of excess water and moisture. According rodent control services, maintaining the relative humidity between 30% to 60% will help control mold, dust mites and cockroaches. Employ integrated pest management provided by https://toppestkillers.com – Bed Bug Treatment experts to control insect and animal allergens. Cooling-tower treatment procedures exist to reduce levels of Legionella and other organisms, if you want to use the bets one in the market, check this Bed bug hotel pack.

    According to HVAC experts like Moffett Plumbing & Air, install and use exhaust fans that are vented to the outdoors in kitchens and bathrooms, and vent clothes dryers outdoors. These actions can eliminate much of the moisture that builds up from everyday activities. There are exhaust fans on the market that produce little noise, an important consideration for some people. Another benefit to using kitchen and bathroom exhaust fans is that they can reduce levels of organic pollutants that vaporize from hot water used in showers and dishwashers. Ventilate the attic and crawlspaces to prevent moisture build-up. Keeping humidity levels in these areas below 50% can prevent water condensation on building materials. Tulsa bathroom remodeling specialists will install your new bath products leaving you to indulge in your perfect bathroom remodel!

    If using cool mist or ultrasonic humidifiers, clean appliances according to the manufacturer’s instructions and refill with fresh water daily. Because these humidifiers can become breeding grounds for biological contaminants, they have the potential for causing diseases such as hypersensitivity pneumonitis and humidifier fever. Evaporation trays in air conditioners, dehumidifiers, and refrigerators should also be cleaned and serviced frequently by a professional AC repair company.

    Thoroughly clean and dry water-damaged carpets, Magnolia Home pillows and building materials (experts like those at Kissimmee, FL Dan Dan The Carpet Man noting that should be done within 24 hours, if possible), or consider removal and replacement. Water-damaged carpets and building materials can harbor mold and bacteria. It is very difficult to completely rid such materials of biological contaminants.

    Keep the house clean. According to a professional cleaner from Maid2Match on the Gold Coast, QLD, house dust mites, pollens, animal dander, and other allergy-causing agents can be greatly reduced, although not eliminated, through regular cleaning. People who are allergic to these pollutants should use allergen-proof mattress encasements, wash bedding in hot water (130° F), and avoid room furnishings that accumulate dust, especially if they cannot be washed in hot water. You can go to website to know about appointing bond cleaning firm.  Allergic individuals should also leave the house while it is being vacuumed because vacuuming can actually increase airborne levels of mite allergens and other biological contaminants. Using central vacuum systems that are vented to the outdoors, or vacuums with high efficiency filters may also be of help – take a minute and check the Roomba 980 vs 960 review.

    Take steps to minimize biological pollutants in basements. Clean and disinfect the basement floor drain regularly. Do not finish a basement below ground level unless all water leaks are patched and outdoor ventilation and adequate heat to prevent condensation are provided. Operate a dehumidifier in the basement, if needed, to keep relative humidity levels between 30% to 50%. Apartment Guide insures that you don’t have to clean anything when you move to your own new apartment or house. They also help you find the best ones around town!

    Dave Park
    Advantage Home Inspection Raleigh
    Davepark@advantageinspection.com

    Advantage Home Inspection Raleigh. . . performs the Nation’s Best Home Inspection and provides the Nation’s Only “No Denied Claims Warranty” available in the industry. For the last 20 years, Advantage Home Inspection has been the deciding factor for the people we serve: Buyers, Sellers, Real Estate Agents and Home Inspectors.

    Tags: , , , , , , , , , , , ,

  • Can I Get A Witness, Home Inspectors, Home Warranty, Marketing, Realtors, Sales Comments Off on A “Nationwide” Endorsement

    Advantage Companies Announces Program Relationship with Nationwide Insurance.

    AdvantageInspection.com and AdvantageHomeWarranty.com, providers of home inspections and home warranties respectively, announce a program relationship to offer home physicals and home warranty protection to the insurance customers at Nationwide Insurance beginning June 15, 2009.

    Greenville, SC (PRWEB) June 8, 2009 – AdvantageInspection.com, a home inspection provider and AdvantageHomeWarranty.com, a home warranty provider announce their partnership program with Nationwide Insurance beginning June 15, 2009.  This program will offer home physicals and home warranty protection to insurance customers of Nationwide.

    Nationwide Insurance selected The Advantage Companies because Advantage  logo-nationwidehas separated themselves from their competitors by offering the first and only home warranty in America to be underwritten by the home inspection.  The inspection underwriting allows Advantage Home Warranty to cover more of the major systems and individual components in the home. 

    Advantage’s “no denied claims” coverage exclusive guarantee is that claims will not be turned down as a result of any pre-existing condition not documented in the inspection report.  This coverage addresses a major complaint in the home warranty industry.

    The Advantage Home Physical and the Advantage Home Warranty will provide their clients “piece of mind” by providing detailed information about the home and giving the nation’s best coverage of the primary structure, major systems, and appliances.  Advantage further offers complimentary Safety Evaluations with every inspection. Homes meeting safety requirements set forth by Nationwide can save on their homeowners insurance. (terms and conditions apply)

     

    “By combining Nationwide’s On Your Side promise and Advantage Companies Total Protection, customers can achieve a greater sense of security and peace of mind as a homeowner – a great feeling to have in these uncertain economic times” said Ronald Wehner, Sr. Business Consultant with Nationwide’s Strategic Partnerships.

    For additional information on Advantage Inspection or Advantage Home Warranty please visit www.advantagehomewarranty.com  or www.advantageinspection.com.  For additional information on Nationwide Insurance please visit www.nationwide.com.

    AHW is available in SC, NC, KY, AL, TN, & GA. 

     

    Contact:                                                                                     

    Dave Park

    Advantage Companies
    Phone: 919-850-2526

    www.adrdu.com

    davepark@advantageinspection.com

     

    Advantage Inspection & Advantage Home Warranty are registered trademarks.

     

    ###

    Tags: , , , , ,

   

Recent Posts

Recent Comments